Datasheet

Specifications for Leuze end devices
Leuze electronic MA 248i 99
TNT 35/7-24V
ODSL 9, ODSL 30 and ODSL 96B
Notice!
The default settings of the ODS serial interface have to be adjusted! Further information on
configuration of the interface can be found in the technical description of the corresponding
device.
Specifications for the serial interface
Specifications for Command mode
Command mode cannot be used with the ODSL 9, ODSL 30 and ODSL 96B.
The ODSL 9/96B is to be operated in the "Precision" measure mode. The mode is set
through the display menu via Application -> Measure mode -> Precision. You can find
more details on this in the technical description.
Default parameter ODSL xx
Baud rate 38400
Data mode 8N1
Handshake no
Protocol ASCII transmission, 5-digit measurement value
Frame <Data>