Datasheet

Leuze electronic GmbH + Co. KG In der Braike 1 D-73277 Owen Tel. [phone] GS 61… - 07
[e-mail] • www.leuze.com
Locking the teach button via the teach input
GS 61/… (with Teach)
A static high signal on the teach input locks the teach button on the device
so that no manual operation is possible (e.g. protection against erroneous
operation or manipulation).
If the teach input is not connected or if there is a static low signal, the button
is enabled and can be operated freely.
Notices for integrating the sensor in a control concept
If the sensor is taught externally via a control, it may be necessary to receive acknowledgment from the sensor with respect to
its current teach state. Use the following chart for this purpose:
Operating mode Reaction from sensor
Dispensing mode Dynamic output signal: alternates between gap and label
Teach Static output signal: the state prior to teaching is frozen
Teach OK Output signal is dynamic again
Teach faulty Output signal is dynamic again - repeat teach event if necessary
GS 61 Forked photoelectric sensor