Datasheet

GS 61… - 07 2016/01
Short instructions for sensor adjustment via teach button for GS 61/… (with Teach)
≥ 2 s
≥ 7 s
Standard function
Normal operation after switch-on
ON LED - green = ready
OUT LED - yellow = switching output
WARN LED - red = warning
Teach-in (level 1)
Can be performed either with dynamic teaching
(described in the following) or with static teaching
Green ON LED and yellow OUT LED
flash simultaneously 3 x per sec.
Move several labels through the sensor
Briefly press the button again to end the teach event
Red WARN LED is off
if teach is error-free
Setting switching behaviour (Level 2)
Setting the switching output:
Signal in the gap/signal on the label
Green ON LED and yellow OUT LED
flash alternately 3 x per sec.
Release the button, green ON LED continues to flash
OUT LED - yellow: on=signal in the gap
off=signal on the label
Pressing the button briefly once more terminates the setting
with the currently indicated switching behaviour
= function lockable through constant application of U
B
on the teach input (for devices with teach input only)
GS 61