Manual

4
required, but the scope must clear the bolt handle, hammer (on lever actions
and handguns), sights, and barrel.
When installed, be sure that your scope does not interfere with firearm
operation and does not contact anything except the mount rings.
I NSTALLING THE BASE , RINGS , AND SCOPE
Please refer to the instructions included with the base and rings for their
proper installation on the firearm.
NOTE: If necessary, it is safe to position the rear mount ring directly on the
exposed threaded area near the eyepiece to allow a more forward placement
of the scope.
NOTE: The windage and elevation adjustments on new Leupold scopes are
centered as part of the assembly process. If you are mounting a scope that was
previously mounted on another rifle, you should center the adjustments (please
see Centering Windage and Elevation Adjustments).