Manual

VX-II and Vari-X III models have a pointer dial that moves with the

adjustment slot. This dial also can be moved independently to align with the

zero on the outermost dial. To reposition this dial simply rotate it until the

pointer is aligned with the zero.

To reposition the dials on Target and Tactical models:

Loosen the set screws that surround the top of the knob until the cylinder

turns freely.

Move the cylinder dial by hand to align the zero with the white

perpendicular mark at the base of the cylinder.

Tighten the set screws until the cylinder is secure.

Target-style dials

can be adjusted

to the new zero

position by

loosening the

set screws, rotating the dial,

and tightening the set screws.

VX-ll and

Vari-X III dials

have a separate

pointer dial

that can be

adjusted to indicate the

new zero position.