Manual

19
Z EROING THE WINDAGE AND ELEVATION
DIALS AFTER SIGHTING IN
All Leupold scopes feature adjustment dials, either numbered or with an
indicator, that can be repositioned to align the marked zero of the dial with
the position indicator without changing the adjustment setting of the scope
that was achieved when sighting-in. This allows the shooter to know the original
zero of the rifle in the event that further adjustments are made in the field.
To reposition the dials on VX
TM
-I and Fixed Power models, move the outer-
most dial so that the zero aligns with the stamped line indicator mark on the
top of the adjustment screw that is perpendicular to the coin slot.
VX-I and Fixed Power
dials adjust easily to indicate
the new zero position.