Manual

8
Using the Data Obtained
With the Tactical Milling
Reticle or H27
Once you have estimated the distance to the target with the reticle, there
are two primary methods of using this information. Both require that you
know the specific bullet drop of the ammunition you are using, measured in
milliradians.
If your bullet drop has been measured in inches, a conversion to MOA will
need to be applied using the formula below.
Once the bullet drop has been measured in MOA, use the formula below to
convert MOA to mils:
(Bullet Drop in Inches ÷ 1.047)
Target Distance in Hundreds of Yards/Meters
= Bullet Drop in MOA
Bullet Drop in MOA
3.44
= Bullet Drop in Mils