Manual

3
TMR reticle offers areas of .2 mil subdivisions to precisely measure the common
one meter target quickly from 500 to 1,000 meters and beyond. This has previ-
ously been the most difficult task in long-range shooting, since this entire range
lies in the span between one and two mils. The position of the .2 mil subdivi-
sions are intentionally placed on the periphery of the fine crosshair in order to
keep the central area clutter free. All existing mil dot calculations and formula
tools are compatible with the Leupold TMR design.
Products containing Horus reticles are produced under license from Horus
Vision, LLC and protected by one or more of U.S. Patents 6,681,512, 6,453,595,
6,032,374, and 5,920,995; additional patents pending.
The Horus® H27 reticle is uniquely engineered to facilitate shooting at any
number of unknown ranges without mechanical adjustment, Horus reticles are
designed to easily solve many of the complex issues facing long range shooters.
When properly utilized, Horus reticles can be used for range estimation, hold-
over and windage correction, leading moving targets, second shot correction,
and bracket snap shooting with both supersonic and subsonic ammunition.
All H27 reticle markings are calibrated in Mil-based increments, allowing for
precise measurement to the nearest 1/10 Mil. When zeroing the H27, the main
crosshair should be precisely zeroed to match the point of impact at 100 yards.