Tactical Binocular USERS GUIDE
Table of Contents Using Your Leupold Tactical Binocular . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Warranty Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 The Leupold Limited Lifetime Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Thank you for choosing a Leupold® Tactical binocular. We trust that all the work we put into it will reward you with years of enjoyment and trouble-free use. Using Your Leupold® Tactical Binocular Using your Leupold Tactical binocular is very simple. However, you must set them to match your eyesight before use. This is done by adjusting the interpupillary distance and focusing the binoculars to your own visual acuity.
SETTING THE DIOPTER ADJUSTMENT Setting the diopter adjustment of your binocular properly is very important, as properly adjusted binoculars will prevent eye strain and provide you with a crisp, sharp image. TO SET THE DIOPTER ADJUSTMENT ON RIGHT EYEPIECE DIOPTER ADJUSTMENT MODELS: 1. View an object about 100 yards in the distance. 2. Cover the right objective lens with your hand. 3. Adjust the center focus wheel (located between the two barrels) until the image presented to your left eye is clear and sharp.
3 3. Cover the left objective lens with your hand. 4. Adjust the center focus wheel (located between the two barrels) until the image presented to your right eye is clear and sharp. 5. Cover the right objective lens with your hand. 6. Adjust the diopter adjustment dial until the image presented to your left eye is clear and sharp. 7. Push down the lockable diopter adjustment dial so that it locks into place. Your binocular is now focused for your eyesight.
estimation of targets that are not parallel or perpendicular to the horizon CLEANING You can clean the fully armored body by simply wiping off any accumulated dirt or dust. Clean the lenses as you would a camera lens. For optimal cleaning, use the Leupold Lens Cleaning System. Begin by using the brush to whisk away dust. Then use the microfiber cleaning tip, which is impregnated with a special non-liquid cleaning compound, to clean the glass.
5 Warranty Service Leupold Tactical optics are engineered and manufactured to standards set and monitored by the design engineers at Leupold’s plant in Oregon. The goal is to provide you with reliable performance at a reasonable price. Should service ever become necessary, these binoculars are backed by the Leupold Limited Lifetime Warranty. All service work is performed by the Leupold Product Service department in Beaverton, Oregon.
4. Ship the binocular by parcel or mail service (insured, if possible) to one of the following addresses in the United States: BY PARCEL SERVICE: Leupold Product Service 14400 NW Greenbrier Parkway Beaverton, OR 97006-5791 USA BY POSTAL SERVICE: Leupold Product Service P.O. Box 688 Beaverton, OR 97075-0688 USA Our Product Service telephone number is (503) 526-1400. We can also be contacted through our Web site at www.leupold.com.
7 The Leupold Limited Lifetime Warranty Leupold Tactical non-electronic products are warranted for as long as you own them. We warrant them to be free of defects in materials and workmanship, and to function satisfactorily under normal use conditions. Leupold Tactical binoculars are waterproof; however, all quality optics, if submerged, should always be retrieved as quickly as possible.
Leupold & Stevens, Inc. reserves all other rights. AMERICA’S OPTICS AUTHORITY; DESIGN ONLY (GOLDEN RING); GOLDEN RING; KATMAI; L AND DESIGN; and LEUPOLD are registered trademarks of Leupold & Stevens, Inc., Beaverton, Oregon. CASCADES; GREEN RING; GREEN RING DESIGN; MESA; OLYMPIC; PINNACLES; RX; SEQUOIA; and YOSEMITE are trademarks of Leupold & Stevens, Inc., Beaverton, Oregon. Note: We reserve the right to make design and/or material modifications without prior notice.
www.leupold.
