Manual

4
100 meters or 1 meter at 1,000 meters. Knowing this subtension and knowing
the size of the target (or a reference object near the target) allows the distance
to the target to be estimated with considerable accuracy.
The base scale for the Mil Dot is 1.0 milliradian and the base scale for the TMR
is .2 milliradians. The incremental milliradian values designated by various hash
marks of the TMR are 5.0, 1.0, .50, .40, .20, .15, or .10 milliradians. The fine cross-
hair scale totals 10 milliradians per axis, with the addition of a 5 milliradian hash
mark (TMR) on each end post (for a total of 20 milliradians per axis). The scale
can be visually subdivided and/or combined by a trained user to produce infinite
milliradian reference combinations for limitless target ranging, leading, or hold-
over precision. Since the holdover features are presented in milliradian incre-
ments, they can be correlated to any ballistic trajectory. Included in this booklet
are ballistic values for four popular rounds (see pages 13 -14). The reticle can
also be used to estimate windage and lead moving targets in the same manner
as all milliradian based reticles.
To use the Mil Dot or TMR simply determine the range to the target using the
mil system, then use the corresponding aiming point that is matched to your
cartridge to engage the target.