User's Manual

COMPLETING THE INSTALLATION

1. Without disturbing the optimal eye relief position, rotate the scope until the

elevation adjustment dial is at the top of the scope.

2. From a firing position, check to be sure that the vertical hair of the reticle

aligns with the vertical axis of the firearm. Misalignment will not affect

accuracy at moderate distances but it can diminish long range accuracy.

3. When you are satisfied, tighten the ring screws evenly and securely.

FOCUSING THE RETICLE

Secure the scope and firearm in a firm rest. Safely point the scope at a light col-

ored background object. With the scope approximately four inches from your

W A R N I N G

If a scope is mounted too far to the rear, the eyepiece can injure the shoot-

er’s brow. Shooting at an uphill angle also increases this hazard because

it shortens the distance between the brow and the rear of the scope. For

this reason, Leupold scopes are engineered to provide generous eye relief.

Therefore, when mounting your scope, we recommend positioning it as far

forward in the mounts as possible to take full advantage of this generous

eye relief.