User's Manual

28
TROUBLE SHOOTING TIPS
Before you ship a scope back to the factory for service or repair,
please check the following items:
1. Check the mount to make sure the scope is mounted securely
to the rifle. Try, with bare hands only, to gently twist the scope in
the rings or see if anything moves when you jiggle it. If there is
any movement, retighten the mounting system according to
mounting instructions.
2. Make sure the action of your rifle is properly bedded in the stock,
and that all receiver screws are tight and have been tightened in
the sequence recommended by the manufacturer. A loosely fitted
stock can cause changes to the point-of-impact.
3. When test firing a rifle to check the point-of-impact relative to
windage and elevation adjustments, be sure to fire from a solid
bench with sandbags supporting the forearm and buttstock.
4. Be sure to use factory-loaded ammunition of the same bullet type,
weight, and preferably, lot number. If one type of ammunition
does not shoot well, try another brand or bullet weight.