User's Manual

2. Remove the old battery from its position in the center of the dial.

This can be done in two ways:

(A) Grasp the edges of the battery between the thumb and

foreﬁnger and lift it free of the dial.

(B) Turn the scope so that the illumination dial faces downward

and gently tap the illumination control against the edge of your

palm.

3. Insert the new battery, positive (+) side up.

4. Replace the battery cover on the illumination dial and turn it

clockwise with a coin until it is secure, while holding the sides of

the illumination dial to keep the entire dial from turning.

Replacement 3-volt lithium batteries

CR2032 batteries are becoming as common and are as readily

available as typical battery sizes ( AAA, AA, C, and D). Replacement

CR2032 lithium coin batteries can be purchased at most stores

where batteries are sold. Use only high quality battery brands such

as Sony

, Energizer

, Panasonic

, or Duracell

for safe and efﬁcient

battery performance.