User's Manual

23
To illuminate the reticle:
1. Grasp the illumination dial located on the left side of the
adjustment turret.
2. Turn the dial clockwise from the OFF position to the first number
indicated on the dial.
3. View the target through the scope to determine if the reticle is
bright enough to stand out clearly against the target.
4. If more illumination is required, continue turning the dial clock-
wise until the reticle is clearly visible against the target. The
first 2 settings are night vision compatible, while settings 3-8 are
intended for use in brighter situations.
5. For convenience, there is an OFF position located between each
of the intensity settings, allowing you to preserve the battery
and quickly obtain your preferred illumination setting.