User's Manual

Using the Illumination/

Holographic Dot

The control dial for the Mark 8 CQBSS Illuminated Reticle is located on the

left side of the adjustment turret.

The Mark 8 CQBSS may be used in either the standard or the

illuminated state. When not illuminated, the reticle performs the

same as the reticle in a standard non-illuminated Leupold scope.

When the illumination is activated, a 5 MOA holographic dot will

appear in the center of the reticle providing improved contrast and

allowing faster target engagement. For models which do not include

a holographic dot, portions of the reticle will illuminate to provide

a better distinction in poorly lighted conditions between the target

and the position of the reticle.