User's Manual

standard trajectory of M118 LR 175 grain

ammunition, alternate dials (available

through the Leupold Custom Shop) can

easily be installed. To install an alternate

BDC dial, simply loosen the set screws

and lift the Pinch and Turn elevation

dial assembly from the scope. Once the

entire assembly has been removed from

the scope, unscrew and remove the thin

knurled ring at the bottom of the dial

assembly and slide the BDC ring off the

dial assembly.

To install the new BDC ring, slide the BDC ring onto the dial, align

the tab on the top of the new BDC ring with the notch in the dial,

then lock it into place by threading the thin knurled ring onto the

dial.

To install the completed Pinch and Turn dial assembly back onto the

Mark 8 CQBSS, place the dial assembly over the adjustment and push

down. To engage the hard stop, push the dial toward the maintube

.5L

.5R

2.5L

2.0L

1.5L

OFF

3.5

Notch

Tab