User's Manual

ELEVATION ADJUSTMENTS FOR THE LEUPOLD MARK 8 CQBSS

The elevation adjustment is equipped with a Bullet Drop Compensa-

tion (BDC) dial matched to the standard trajectory of M118LR 175

grain ammunition. For more information relating to zeroing the BDC

dial and proper use, please see Zeroing and Using the BDC Dial in the

next section.

Elevation adjustments can be made by pinching the dial on the top of

the scope and rotating the elevation adjustment. To move the point

of impact up, rotate the adjustment counter-clockwise. To move the

point of impact down, rotate the adjustment clockwise. Each click of

the elevation dial will move the point of impact 0.1 milliradian. The

elevation dial can be rotated 10 milliradians in the up direction when

the hard-stop is engaged.

For additional elevation travel, the ad-

justment can be set to allow multiple

revolutions by loosening the set screws

and lightly pulling the dial up until the

detent is felt and the knurled ring is

.5L

.5R

2.5L

2.0L

1.5L

OFF

3.5