Manual

31
4) Press POWER to begin incrementing through the altitude settings.
The default setting is 1000 feet. Pressing POWER will increment
through a range of 0 feet to 9,999 feet in 500 foot increments.
When the appropriate altitude is displayed, you have completed the
input process for setting up the temperature and altitude at which
the striking distances were measured. To save the changes and
return to ranging mode, let the unit sit idle for at least 20 seconds
until an automatic power-down occurs, or simply press and hold
Mode for at least 1 second. To continue through the Quick Set Menu
and manipulate another feature, press and release MODE until the
appropriate mode is displayed.