Manual

14
and eyepiece adjustment ring of the scope after all mounting and initial adjustment
procedures have been completed.
As the eyepiece of the Leupold Mark 4 CQ/T 1-3x14mm scope rotates when
magnification adjustment is made, the ocular lens cover should be seated
with the magnification set at 1x and the open ocular cover lid at the 11 o’clock
position. This will prevent the opened cover from getting in the way when the
magnification level is increased to 3x.
LENSES
The Leupold Mark 4 CQ/T 1-3x14mm scope lenses are coated with anti-reflective
ion assist DiamondCoat™ coatings to prevent reflection, light scattering, and
to increase their scratch resistance. Ideally, they should be cleaned in the same
way as a camera lens. Begin by using a standard lens brush to remove dust, and
then pure alcohol, high-grade glass cleaner or pure water on a cotton swab to
remove any smudges.
WINDAGE AND ELEVATION ADJUSTMENTS
These adjustments are permanently lubricated. There is no need to lubricate
them. Keep turret caps on, except when adjusting, to keep out dust and dirt.
Maintenance