Manual

13
Both the windage and elevation adjustment dials have a pointer dial atop
the increment dial that moves with the slotted adjustment screw. This dial also
can be moved independently to align with the zero on the outermost dial. To
reposition this dial, simply rotate it using a small flat bladed screw driver, knife
blade, or other tool until the pointer is aligned with the zero position of the
increment dial.
MOUNTING ACCESSORIES TO THE SCOPE
The Leupold Mark 4 CQ/T 1-3x14mm scope is designed with two MIL-STD-1913
rails, one running along the top and one running along the right side of the
scope. These rails are intended for use in the mounting of additional accessories
to the scope, such as flashlights, lasers, and other tactical equipment as needed.
An accessory should be mounted to the scope following the instructions
provided by the accessory’s manufacturer.
LENS COVERS
The Leupold Mark 4 CQ/T 1-3x14mm scope is standardly equipped with both
ocular and objective flip-up lens covers. The use of these lens covers is left to the
discretion of the scope user. These covers simply seat over the objective ring
Scope Accessories