Manual

12
7. Hold the rifle steady. With the bull’s-eye centered when viewed through
the bore, make windage and elevation adjustments to the scope until the
very center of the reticle is aligned with the bull’s-eye of the target.
LIVE FIRE ZEROING USING THREE-SHOT GROUPS
Regardless of which boresighting method was used, the next steps are the
same on the firing range. To ensure reliable results, always fire from a rested
position when performing these steps.
1. Fire a shot or two.
2. If you are several inches off center, make an appropriate amount of
adjustment to move the reticle to the center of the target.
3. Carefully fire a three-shot group.
4. Use the center of that group as a reference point for the final adjustments
to windage and elevation.
ZEROING THE WINDAGE AND
ELEVATION DIALS AFTER SIGHTING IN
Leupold Mark 4 CQ/T 1-3x14mm scopes feature adjustment dials that can be
repositioned to align the marked zero of the dial with the position indicator
without changing the adjustment setting of the scope that was achieved when
sighting in. This allows the original zero of the rifle to be known in the event
further adjustments are made in the field.