Manual

9
one specific setting, illumination settings can be made without the necessity of
looking at the scope. The OFF setting, indicated by a ray that is raised above
all the others, can be located tactilely. As the illumination control dial setting
indicator is directly in front of the power selector, the proximity of this OFF
setting to the power selector or its position away from it in a clockwise
orientation tactilely indicates the intensity setting of the reticle.
WINDAGE AND ELEVATION
The windage and elevation adjustment dials of the Leupold Mark 4 CQ/T
1-3x14mm scope are located on the top and right side of the scope respectively.
These dials are covered with a knurled, threaded cover, the lip of which can be
used to make adjustments to the slotted head of the dial if no other tools are
available. Both adjustment dials are marked in 1/2 minute of angle increments
and click into position at each of these markings.
THE CIRCLE DOT RETICLE
The Circle Dot reticle of the Leupold Mark 4 CQ/T 1-3x14mm scope is designed to
offer fast target acquisition in any environment.
Dot Size: 3 MOA at 3x, 9 MOA at 1x
Circle Size: Edge to edge, the subtension of the circle is 18 inches at 25 yards, or
6 feet at 100 yards when set on 3x. From the center of the dot to the edge of the
circle, the subtension is 6 feet at 200 yards when set on 3x.
Circle Line: The width of the line creating the circle is large enough to be easily visible