Manual

7
4. When you are satisfied with the image of the reticle, turn the lockring
clockwise so that it rests firmly against the eyepiece.
5. Grasping the eyepiece firmly with one hand and the lockring and diopter
adjustment ring with the other, give them both one final clockwise turn to
secure the lockring firmly in place.
If your eyesight changes, readjust the diopter adjustment ring. As eyesight
changes with age, you may want to check the sharpness of the reticle on your
scope every few years to ensure it is still adjusted correctly for your eye.
MAGNIFICATION
The magnification selector of the Leupold Mark 4 CQ/T 1-3x14mm scope is
joined to the eyepiece to form a large gripping surface. This, combined with
the knurled ring with two pronounced ridges separated by a groove large
enough for a finger to rest within located at the 1x position, is to allow the
magnification level of the scope to be changed without the necessity of
looking directly at the scope.
CHANGING THE MAGNIFICATION LEVEL OF THE SCOPE
1. Grasp the eyepiece firmly, placing the index finger or thumb between the
two large ridges of the magnification selector.
Operating the Scope