Tus neeg siv phau ntawv
Table Of Contents
- Thank you for purchasing our products. This manual
- Note:
- Notes:
- Smart Phone System Requirements
- Notes:
- Note:
- Note:
- Notes
- Note:
- Notes：
- Note:
- Note:
- 1)Inactive Exit Prompt
- 2)The prompt of being forced to exit the sport mode
- Notes:
- 3)Prompt forced to exit sport mode when battery is l
- Notes:
- Notes:
- Failure to find the tracker when pairing
- Occasional failure to connect with Bluetooth
- Failure to charge the tracker
- Failure to receive SMS/calls notifications
- Failure to count steps accurately
- Failure to measure heart rate
- Failure to connect to smartphone
6
Pairing the Tracker with Your Phone
1)
Please ensure your phone’s Bluetooth is enabled before beginning thepairing
process.
2)
Open the VeryFitPro app on your smartphone and go to the "Device" page, tap "Pair
device", then your smartphone starts searching devices.
3)
In the list of found devices that appear on your phone, tap "ID115Plus HR" to connect
the tracker to your smartphone. (If your phone failed to find ID115Plus HR, please tap
the touch key to wake the tracker and search the tracker on your phone again.)
Notes:
Once the tracker is connected to your app, the tracker will automatically search and
reconnect itself if the connection is lost or when Bluetooth is restarted after manual
disconnection.
If the tracker is unbound from the app, the information on the tracker will be reset, and
the information on the app will be cleared. Please do not unbind the connection
unless there is an issue that will require a reset.
The tracker can only pair with one Bluetooth device at a time. When pairing, please
ensure there are no other Bluetooth devices nearby.