Tus neeg siv phau ntawv
Table Of Contents
- Thank you for purchasing our products. This manual
- Note:
- Notes:
- Smart Phone System Requirements
- Notes:
- Note:
- Note:
- Notes
- Note:
- Notes：
- Note:
- Note:
- 1)Inactive Exit Prompt
- 2)The prompt of being forced to exit the sport mode
- Notes:
- 3)Prompt forced to exit sport mode when battery is l
- Notes:
- Notes:
- Failure to find the tracker when pairing
- Occasional failure to connect with Bluetooth
- Failure to charge the tracker
- Failure to receive SMS/calls notifications
- Failure to count steps accurately
- Failure to measure heart rate
- Failure to connect to smartphone
13
Notes:
Only when "SNS Alert" is enabled in the app ("Device" page → "SNS Alert" → "Allow
notification"), will messages be notified. (After enabling/disabling the SNS Alert
function, tap "√" to save your settings.)
When the "Do not disturb" function is enabled in the app ("Device" page → "More" →
"Do not disturb"), messages will not be notified on the tracker during the
do-not-disturb period.
9.3 Sedentary Reminder
The tracker vibrates to remind you to get up and move around when you
have been sitting too long ("Device" page →"Sedentary Alert", enable the
Sedentary Alert function and set the remind interval.)
9.4 Remote Camera Control
If you want to position your phone for a photo and then take the photo from a distance,
you can use the tracker to take the photo.
1)
Make sure you have allowed the VeryFitPro app to
access your phone camera and photos in your phone
settings.
2)
Go to the "Device" page in the app and tap "Camera",
then a camera icon appears on your tracker screen.
3)
Tap the touch key on the tracker to have your
smartphone shoot photos.
Photos are saved in your phone’s photo album.
9.5 Device Error Notification
When the tracker has an exception, an error message appears.
Status code:
-01 indicates acceleration sensor abnormality;
-02 indicates the heart rate sensor is abnormal;
-03 indicates touch IC is abnormal;
-04 indicates the flash is abnormal;