Fitness Tracker ID115Plus HR User Manual Thank you for purchasing our products. This manual addresses the safety guidelines, warranty, and operating instructions.
Version Getting Started..................................................................................................................................1 What’s in the box...................................................................................................................... 1 What’s in this Document..........................................................................................................1 Setting up Your Tracker.................................................................
Getting Started What’s in the box Fitness tracker (ID115Plus HR with bands) Quick start guide Note: This tracker is designed with a built-in USB plug. No charging cable is required for charging, and no charging cable or wall charger is included in the package. What’s in this Document This manual gets you started quickly with setting up your tracker.
Setting up Your Tracker Charging your tracker Please charge your tracker for at least 10 minutes to have it activated before initial use. 1) Insert the built-in USB plug of the tracker into the USB port for charging. Please ensure that the metal strips align with the USB strips. When the tracker shows that the battery is low, connect the tracker to a USB charging adaptor or a port with 5V-500mA. If the tracker is installed correctly, the tracker will vibrate, and you will hear an audio tone.
Assembling / Disassembling your tracker Assembly Insert the bands in the direction of the arrow. Disassembly Gently pull the bands off the tracker body in the direction of the arrow.
Wearing Your Tracker All-day wear and exercise For all-day wear when you’re not exercising, wear the device on your wrist horizontally, a finger’s width below your wrist bone and lying flat, the same way you would put on a watch. For optimized heart rate tracking, keep these tips in mind: 1. Experiment with wearing the tracker higher on your wrist during exercise. Because the blood flow in your arm increases the farther up you go, moving the tracker up a couple of inches can improve the heart rate signal.
Using Your Tracker App Installation Use the tracker with our customized VeryFitPro app. You can download VeryFitPro from App Store/Google Play or scan the QR codes below to download. Notes: The VeryFitPro app is only compatible with smartphones, not tablets or PCs. Smartphone operating system should be iOS 7.1 / Android 4.4 or higher; Bluetooth version should be 4.0 or higher. Smart Phone System Requirements iOS 7.1 or higher Android 4.4 or higher Bluetooth 4.
Pairing the Tracker with Your Phone 1) 2) 3) Please ensure your phone’s Bluetooth is enabled before beginning the pairing process. Open the VeryFitPro app on your smartphone and go to the "Device" page, tap "Pair device", then your smartphone starts searching devices. In the list of found devices that appear on your phone, tap "ID115Plus HR" to connect the tracker to your smartphone.
Getting to Know Your Tracker Touch Key After the tracker is bound to the app, the main screen will display the time and date as shown in fig. 1. You can customize the main screen. See Function Introduction Display Note: This is a non-touch screen; please use the touch key to choose different functions. Touch Key fig. 1 Note: Tap the touch key to switch to different interfaces. Hold the touch key to enter the function.
Tracker Interfaces Tap the touch key to look through different interfaces/go to different functions: Notes "Alarm Mode" is displayed on the tracker screen only when alarm alert(s) is/are added and enabled in the app ("Device" page → "Alarm Alert"). "Walk Mode", "Run Mode" and "Bike Mode" are displayed on the tracker screen by default. You can set up to 3 different sports modes from among 14 sports modes in the app to display on the tracker screen ("Device" page → "More" → "Activity display").
2. Tracking Daily Activity Data The tracker tracks your all-day activity data such as steps, distance, calories burned and active minutes. Hold the touch key for 2s to view detailed step data, and tap to flip through the data. Note: You can use the app to set your sports target ("User" page → "Target Setting"). When you reach your sports target, the tracker vibrates to remind you. 3. Monitoring Heart Rate The tracker tracks your real-time heart rate automatically and continuously.
5. Tracking Sports: Walk The tracker tracks your exercise data while you walk. 1) Hold the touch key for 2s to enter walk mode. 2) While exercising, tap the touch key to flip through exercise data. 3) Hold the touch key for 2s to exit walk mode. The following data is displayed after the exercise has ended. Tap the touch key to flip through exercise data: Note: Data for exercises lasting less than 1 minute will not be saved. 6. Tracking Sports: Run The tracker tracks your exercise data while you run.
7. Tracking Sports: Bike The tracker tracks your exercise data while you cycle. 1) Hold the touch key for 2s to enter bike mode. 2) While exercising, tap the touch key to flip through exercise data. 3) Hold the touch key for 2s to exit bike mode. The following data is displayed after the exercise has ended.
3) Prompt forced to exit sport mode when battery is low Tap the touch key to confirm the prompt if the tracker is forced to exit sport mode when the battery is low, then exit the sport mode and exercise data is displayed. 7.2 Abnormal Operation during Exercise When the app and the tracker are disconnected, the screen will show a waiting prompt: Tap the touch key to exit the waiting prompt interface. 8.
Notes: Only when "SNS Alert" is enabled in the app ("Device" page → "SNS Alert" → "Allow notification"), will messages be notified. (After enabling/disabling the SNS Alert function, tap "√" to save your settings.) When the "Do not disturb" function is enabled in the app ("Device" page → "More" → "Do not disturb"), messages will not be notified on the tracker during the do-not-disturb period. 9.
Basic Specifications Model No.: ID115Plus HR Sync: Bluetooth 4.0 Battery Capacity: 65mAh Working Voltage: 3.7V Working Temperature: -10℃to 45℃ Weight: 0.84oz (23.
FAQs Failure to find the tracker when pairing 1. Make sure your smartphone’s Bluetooth is enabled and your smartphone’s system meets the requirements of Android 4.4 or higher, iOS 7.1 or higher, and Bluetooth 4.0 or higher. 2. Make sure the distance between your smartphone and the tracker does not exceed 0.5 meters and that Bluetooth communication is also within range (10 meters max). 3. Make sure your tracker has enough battery life. If there is still a problem after being fully charged, please contact us.
maximum Bluetooth connection range is 10 meters and can easily be reduced by walls, furniture, etc.) 2. The VeryFitPro app is closed on the phone. (This can occur automatically under certain circumstances.) To reconnect the tracker to your smartphone, please kindly take the following steps: 1. Go to your smartphone system Settings, find the VeryFitPro app and enable the Location and all Notifications. 2. Clear all running/background processes on your smartphone.
irritation or other discomfort, please discontinue using your device and consult your doctor. Do not expose your fitness tracker to extremely high or low temperatures. Do not leave your fitness tracker near open flames such as cooking stoves, candles, or fireplaces. This product is NOT a toy – never allow children or pets to play with this product. Always store the product out of the reach of children. The devices themselves or the many small parts they contain may cause choking if ingested.
circumstances, including the user's physical characteristics, fit of the device, and type and intensity of activity. The activity tracker relies on sensors that track your movements and other metrics. The data and information provided by these devices are intended to be a close estimation of your activity and metrics tracked, but may not be completely accurate, including step, sleep, distance, heart rate, and calorie data.
19
