Instruction Manual

User Manual

Description Qty

(2) WingMan V2 Assemblies, containing:

WingMan Base Plate 2

Hat Brackets 4

Carriage Bolts & Hardware sets 8

Wing with Pads 4

Wire Lock Pin 4

Double Toggles 8

(8) Wheel Cradle Assemblies, containing:

Wheel Cradle 8

Toggle Balls 8

Hair Pin Clip 8

U-Clip 8

Teleporter Assembly, containing

Teleporter Shank Tube and Tilt Tube 1

Telescope Tube 1

Silent Hitch Pin® with Handle 1

Silent Hitch Pin®

Lock (for Silent Hitch Pins)

Tilt Pin (black handle) 1

Safety Cable w/ Biner 1

Parts List

V4 Four-Bike Carrier

Part No. VME-V4

VME-V4rev0614

WingMan Assemblies

Teleporter Assembly

U.S. Patent No : D684917; 6,409,203; 6,609,725; 6,945,550; 8,079,613; patents pending

PAGE 1
V4 Four-Bike Carrier Part No. VME-V4 User Manual U.S.
PAGE 2
V4 Bike Carrier Assembly Step 1: Installing the Teleporter Base Position the Tilt Tube in the horizontal position and lock into place with the black handled Tilt Pin. Lightly rub the top and side surfaces of the Tilt Tube with the included bar of parafin wax to ensure smooth telescoping action and protect the surface of the tube. Tilt Pin Safey Cable attachement hole Silent Hitch Pin® Insert the Teleporter Shank in the hitch as shown with the structural rise above the hitch.
PAGE 3
V4 Bike Carrier Operation Securing Bicycles on Carrier Set bike(s) on wheel cradles. Secure bike(s) to rack starting with the Wheel Toggles. Finish securing with the Double Toggles. Telescope the rack away from the vehicle before loading the rack. Load bikes, starting with the inner-most position (closest to the vehicle). Slowly move the carrier into the non-telescoped, slid-in position and secure the Handle Silent Hitch Pin® before transit.
PAGE 4
V4™ Bike Rack Before Transit: Attempt to shake the carrier to verify the carriage bolts, Tilt Pin, Silent Hitch Pin® with Handle and Silent Hitch Pin® are tight. Verify that the safety pins are indeed locking the Wings to the Base Pockets. Verify the Toggles are securing your bicycles wheels and frame to the carrier as explained earlier. V4 BIKE CARRIER GUIDELINES The V4 Teleporter bicycle carrier’s maximum load weight is 180 lbs. Do not exceed this carrying capacity.