Owner's manual

– 10 –
liTTleGianT Trailer™
LGT11070614
Tools Needed
1/2” Socket Wrench
3/4” Socket Wrench
3/4” Box Wrench
1/2”Box Wrench
Lug Wrench
Phillips head and 3/8” Hex Nut Driver
#2 Phillips Screwdriver Bit
Wire Stripper
Drill for Self Drilling Screw
Description Quantity
Step 12
5/16” x 1-3/4” Bolt 8
1/4” USS Flat Washer 16
5/16” Lock Nut 8
1” Endgate Support Bracket 4
Step 13
5/16” x 1-3/4” Bolt 8
1/4” USS Flat Washer 8
5/16” Lock Nut 8
2” Endgate Body Latch 4
Foam Roll 2
Step 14
Snap Pin 4
Step 15
Wire Harness (in Light Box) 1
Nylon Zipties (in Light Box) 6
Step 16
S/T/T Tail Lights Passenger Side (in Light Box) 1
S/T/T Tail Lights Driver Side (in Light Box) 1
Light Bracket 2
5/16” x 1-3/4” Bolt 4
5/16” Flat Washer 8
5/16” Lock Nut 4
Ring Terminals 2
Step 17
Side Marker Light Assembly 2
(Located in Light Box)
Step 18
Self Drilling Screw 6
1/4” X 1” Flat Washer 6
Lock Washer 6
Step 19
10 X 3/4” Machine head screws 2
1” Washers 4
Nylocks 2
Step 2
1/2” X 3” Bolt 4
1/2” Flat Washers 8
1/2” Nylon Lock Nuts 4
Step 3
Spring Nut, L-Bracket, Hardwares:
5/16” Spring Nut 2
1/2” Spring Nut 2
1/2” X 1” Bolt 2
1/2”Lock Washer 2
1/2” Flat Washer 2
5/16” X 2” Bolt 2
5/16” Flat washer 2
5/16” Split ring lock washer 2
Endgate L-Bracket 2
Spring Nut Holder 4
Step 4
1/2” X 3” Bolt 4
1/2” Lock Nut 4
1/2” Flat Washer 8
Step 5
1/2” X 3-1/2” Bolt 2
1/2” X 3” Bolt 2
1/2” Lock Nut 4
1/2” Flat Washer 8
Safety Cables 2
Safety Cable Washers (Big) 2
Step 7
5/16” X 4” Bolt 12
5/16” Flat Washer 28
5/16” Lock Nut 14
5/16” x 2” Bolt 2
Endgate Support L-Bracket 2
Step 8
Pin Nut Assembly Kit:
5/16” x 1” Bolt 16
5/16” USS Flat Washer 16
Pin Nut 16
5/16” Internal Tooth lock washer 16
Step 10
Self Drilling Screw 12
1” Flat Washer 12
Star Washer 12
Step 11
Self Drilling Screw 22
1” Flat Washer 22
Star Washer 22
For ease of assembly, small hardware parts are kitted and marked by assembly step. Below is a description of parts and quantities:
(Extra hardware Provided for smaller fsatners and screws)
Description Quantity