Manual

LGT Top Load Base Rack

User Assembly Manual

Part No. ACC 3103

The Top Load Base Rack is an optional accessory for the use of carrying kayaks and other equiptment on the LittleGiant

Trailer.

Parts List

Description Qty

Overhead Bars 72” 2

Uprght Bars 4

Base Plates 4

Pin Nuts 4

2.5 X 5/16 Fine Thread

Nuts and Bolts

2 X 5/16 Coarse Thread

Nuts and Bolts

3/8 x 1-3/4 Bolt 4

Tools Needed

11/32 Drill Bit

Drill

1/2” Socket

1/2” Wrench

Uprights

Base Plates

Overhead Bars 72”

Pin Nuts

Top Load Base Rack shown with Racks in Inside Conguration Top Load Base Rack shown with Racks in Outside Conguration

ACC3103rev0614

PAGE 1
LGT Top Load Base Rack Part No. ACC 3103 User Assembly Manual The Top Load Base Rack is an optional accessory for the use of carrying kayaks and other equiptment on the LittleGiant Trailer. Top Load Base Rack shown with Racks in Inside Configuration Top Load Base Rack shown with Racks in Outside Configuration Parts List Description Qty Overhead Bars 72” 2 Uprght Bars 4 Base Plates 4 Pin Nuts 4 2.
PAGE 2
Top Load Base Rack Assembly Assembly Step 1: Attach Base Plate with Endgate Bracket to Trailer Remove the body side latch using a 1/2” tool. The overhead base plates are notched to fit over the end gate latch and the notch must face downward and fit over the end gate side latch. Position the base plate over the end gate latch and secure with the existing latch hardware and shown in image. Place HexCap latch plates (if using HexCap accessory) on the outside of the base plate as shown in image.
PAGE 3
Top Load Base Rack Assembly Usage and Operation • Weight Limit = 200 lbs Evenly Distributed. • Check Bolt Tension Periodically. • Top Load Rack can be used with the LGT HexCap™Hardtop Cover. • Racks maybe configured in multiple ways to fit large as well smaller kayaks. Please Note the Kayaks and Kayak Mounts are not included in the top load base rack. Also, the Side Load Kayak Mount is sold seperately, part no. ACC 3102.