Installation Guide

www.lesscare.com
SHOWER BASE TRAYS
SHOWER BASE TRAY INSTALLATION
11
Fit shims in any gaps
between the studs and
the flange.
F
Level the shower base tray using level tool.
Important: if the shower base tray is not completelly
leveled, water will not drain completelty and will
collect on the shower base tray's floor. Water
collection will create a slippery layer on the floor and
may cause slip-and-fall accidents.
After leveling shower
base tray it is highly
recommended to drill
holes through the tile
flanges and use screws to
secure the tile flanges to
the wooden studs for
extra stability of the
shower base tray.
G
Fill all gaps with a 100% waterproof silicone
ALLOW SILICONE TO DRY 24 HOURS
BEFORE PROCEEDING TO THE NEXT
INSTALLATION STEPS
IMPORTANT!
HIGHLY RECOMMENDED!