Installation Guide

www.lesscare.com
ULTRA-E
SHOWER DOORS
INSTALLATION STEPS
12
a.
b.
c.
d. e. f.
g.
Figure 9
9. Draw a line along the Bottom Bracket (11) on the the shower
tray or shower base. Draw a line along the inner edge of the Wall
Profile (9) o the wall. Now set aside the fixed glass. Place the
the Bottom Bracket on the shower tray or shower base, mark the
drilling holes with a pen or marker. Now drill the holes
using Ø8mm(Ø=5/16") drill bit in the tray. Detach the Wall
profile from the Fixed Glass assembly. Place the Wall profile to
the outlined position and mark the drilling holes through the
predrilled holes in the Wall profile. Now drill the holes using
Ø8mm(Ø=5/16") drill bit in the wall.
See Fig. 9 for details.
9
11
9