Installation Guide

www.lesscare.com

ULTRA-E

SHOWER DOORS

INSTALLATION STEPS

5. Disassemble the Hinges (1) from

the glass door carefully and set the

Glass Door (4) aside. Locate the main

body of the hinge to the predrilled

holes, fasten the main body of the

hinge to the wall with screws M5 x

60 (7). Place the Glass Door back to

its position and reassemble the

Hinges.

See Figure 5 for details.

6. Mount the Handle (3) to the Glass Door (4). Place the Bottom

Anti-Water Strip (5) to the bottom edge of the Glass Door.

See Figure 6 for details.

IMPORTANT:

Make sure that clear rubber gaskets are in between the Glass Door

and knob, between washer and glass; between cap and glass door.

Tighten knob and cap with hand only, do not use any types of tools

to tighten it.

Figure 5

Figure 6