Installation Guide
www.lesscare.com
ULTRA-E
 SHOWER DOORS
INSTALLATION STEPS
11
8. Push the Fixed Glass installed with profiles against the wall, align the Fixed Glass (10) with the Glass Door (4) and 
level it. Maket sure the gap between the fixed glass and glass door. If needed adjust the position of the Fixed Glass by 
pulling out the fixed glass with glass profile from the slot of the Wall Profile or  push  the  fixed  glass  with  glass  profile  to 
the slot of the wall profile to make sure the Anti-water strips work well. 
See Fig. 8 for details.
a.
b.
c.
d.
Note: The fixed panel width can be adjusted 
by  increasing  or  reducing  the  overlap 
between  the  glass  profile  and  wall  profile, 
there will be around 1" adjustment.
Example:
Min W=8”
Max W=8”+1”=9”
Figure 8
6
4
4
10
10
4
10










