Installation Guide

www.lesscare.com
ULTRA-E
SHOWER DOORS
INSTALLATION STEPS
10
7.Press the Fixed Glass (10) with attached Glass profile into the slot of
Wall profile (9) Press the Anti-Water strip (8) on the vertical edge of
the fixed glass. Install the Bottom Bracket (11) to the Fixed Glass.
See Fig. 7 for details.
IMPORTANT: Make sure that clear rubber gaskets are in between the
glass door and the bracket plates.
IMPORTANT: Do not let any metal parts come into contact with the
glass directly, which will damage the glass notches and cause
scratches or damage to the Glass Door. If ignored, could result in
serious injury or death.
a.
b.
c. d.
Fixed Glass Assembly and Installation
Note: Use parts from SIDE PANEL COMPONENTS on page 5 for
fixed glass assembly and installation.
If you only order the glass door with hinges
(LBSDE2472/LBSDE3072/LBSDE3672), you do not need to read
this fixed glass installation instruction
Figure 7
Configuration 2
10
9
8
10
11