Installation Guide

a.
b.
www.lesscare.com
ULTRA-E
SHOWER DOORS
INSTALLATION STEPS
6
1. Disassemble the hinge and attach the Hinges (1)
to the Glass door (4).
See Figure 1 for details.
IMPORTANT: Make sure that clear rubber gaskets
and the plastic gasket are in between the glass
door and the hinge plates.
IMPORTANT: Do not let any metal parts come
into contact with the glass directly, which will
damage the glass notches and cause scratches or
damage to the Glass Door. If ignored, could result
in serious injury or death.
ATTENTION:
Never set your glass down directly
onto a tile or concrete floor.
Always use a piece of wood or cardboard
and leave the corner pads on the glass
until it becomes necessary to remove
them to protect the bottom edge and
the corners of the glass from breakage.
Figure 1
Configuration 1
Single Shower Door Assembly and Installation
1
1