Installation Guide

a.
b.
c.
Figure 5
5. Loosen the screw on the Glass Bracket (15) with Allen
Key (17), align the holes of the Brackets to the holes on the
Stationary Glass (11), secure the Upper Guide Rail (2) with
the Stationary Glass together by tightening the screws on
the Glass Bracket with Allen Key.
Please see Fig 5 for details.
ATTENTION:
Never set your glass down directly onto a tile or concrete
floor. Always use a piece of wood or cardboard and leave
the corner protection cover on the glass until it becomes
necessary to remove them to protect the bottom edge and
the corners of the glass from breakage.
www.lesscare.com
ULTRA-D
TUB DOORS • SHOWER DOORS
INSTALLATION STEPS
10
15
15
15
15