Installation Guide

www.lesscare.com
ULTRA-D
SHOWER ENCLOSURES
INSTALLATION STEPS
13
a.
b.
c.
9 Loosen the screw on the Guide Rail Bracket (2) with
Allen Key (17), align the holes of the Brackets(18) to the
holes on the Stationary Glass (14), secure the Upper Guide
Rail (4) with the Stationary Glass together by tightening
the screws on the Guide Rail Bracket with Allen Key(17).
Please see Fig 10 for details.
ATTENTION:
Never set your glass down directly onto a tile or concrete
floor. Always use a piece of wood or cardboard and leave
the corner protection cover on the glass until it becomes
necessary to remove them to protect the bottom edge and
the corners of the glass from breakage.
16
16
16
16
Outside
Outside
Figure 9
Outside