Installation Guide

b.
17. Adjust the Roller(15) and locate the Glass Door Stopper(3)
17.1. Adjust the fasteners on both Rollers (15) to ensure that the bottom edge of the Glass Door (5) will not touch the bottom
of the Guide Block (9).
NOTE: Glass Door can be adjusted up or down for 2mm by adjusting the fasteners on the Rollers.
17.2. Push the Door Stopper(3) close to the wall side, slide the Glass Door to make roller contact to the Stopper and get the
perfect space then lock the stopper screw.
NOTE: Make sure that the stoppers are lock tightly to the roller bar.Please make sure that the Glass Door especially the door
corners will not hit the walls when closed and opened
Please see Fig 18 for details
www.lesscare.com
ULTRA-D
SHOWER DOORS
INSTALLATION STEPS
24
3
15
15
15
15
Figure 18
Inside