Installation Guide

www.lesscare.com
ULTRA-C
SHOWER ENCLOSURES
INSTALLATION STEPS
25
13
13
13
16
14
12
Figure 21
b.
c.
a.
d.
e.
f.
g.
h.
11. The slot direction for the Stationary Glass (16) of the Guide Block (13) can be adjusted. Loosen the screw on the bottom of
the Guide Block and adjust the direction. Put the Guide Block to the Stationary Glass, make sure that the glass is inside the slot
of the Guide Block. Now mark down the predrilled hole of the Guide Block with pencil. Drill the hole with drill bit 8mm(5/16")
on the shower tray or threshold. Apply silicone into the holes, insert the Wall Anchors (14), now secure the Guide Block to the
shower tray or threshold with M5x30 screws (12).
Please see Fig 21 for details
inside
inside
inside
inside
inside
inside
inside
Silicone