Installation Guide

www.lesscare.com

ULTRA-C

TUB DOORS • SHOWER DOORS

INSTALLATION STEPS

c. d.

8. Drill the holes on the wall using 8mm(5/16") drill bit and apply silicone into the holes, insert the Wall Anchors (14).

Drill the holes on the shower tray or threshold with 8mm(5/16") drill bit and apply silicone into the holes, insert the Wall

Anchors (14).

Mount the Wall Bracket of the Guide Rail Bracket (2) to the wall using the Screw M5×60 (17).Mount the male parts of the

Bottom Mount Clamp(15) onto the shower tray or threshold using the Screw M4X30(12).

Please see Fig 8 for details

Note:

The other side of the Guide Rail bracket (2) is installed in the same way.

Figure 8

Silicone