Installation Guide

www.lesscare.com
ULTRA-C
SHOWER DOORS
INSTALLATION STEPS
a.
b.
c. d.
e.
f.
g.
h.
8. Drill the holes on the wall using 8mm(5/16") drill bit and apply silicone into the holes, insert the Wall Anchors (13).
Drill the holes on the shower tray or threshold 8mm(5/16") drill bit and apply silicone into the holes, insert the Wall
Anchors (13).
Mount the Wall Bracket of the Guide Rail Bracket (1) to the wall using the Screw M5×60 (16).Mount the male parts of the
Bottom Mount Clamp(14) onto the shower tray or threshold using the Screw M4X45(9).
Please see Fig 8 for details
Note:
The other side of the Guide Rail bracket (1) is installed in the same way.
Figure 8
12
13
16
9
13
16
Silicone
Silicone
Silicone
Outside
Outside
Outside
Outside
Outside
Outside
Outside
Outside