Installation Guide

Outside
Outside
Outside
Outside
Outside
Outside
13
11
9
11
11
9
a.
b.
c.
f.
18. Install the Anti-Splash Threshold
Pull out the Cover in the guide block (13), put the Anti-Splash Threshold (9) to the slot of the Guide Block, in front of the Glass
Door (7) on the shower tray or threshold. Put the Threshold Cover (11) to the end of the Threshold against the wall. Mark a
drill hole on a threshold with a pencil. Drill the hole on a threshold with drill bit 8mm (5/16"). Attach the threshold and mark
a drill hole on a shower base. Drill a hole in a shower base (refer to figure f. for drill bit size). Apply silicone into the holes,
insert the Wall Anchors (14). Apply the silicone along the bottom of the Anti-Splash Threshold and the slot on the Guide
Block. Now put the Anti-Splash Threshold and the cover back to its position, now secure the Cover to the shower tray or
threshold with M4x45 screws (10).
Please see Fig 18 ( A to K)
e.
d.
www.lesscare.com
ULTRA-C
TUB DOORS • SHOWER DOORS
INSTALLATION STEPS
22
Figure 18
Drill through
the the Anti-Splash
Threshold.