Owner's manual

Page 24
PARTS LIST, GPS-1 & VARIANTS:
WHEN ORDERING PARTS, GIVE SIZE, CLASS, PART NAME, AND PART REFERENCE NUMBER FROM TABLE
BELOW. USE PART NUMBER ONLY TO LOCATE PART ON DRAWING.
PART
PART NAME MATERIAL MATERIAL SPECIFICATION QTY.
NO.
A) COMMON PARTS:
1 ADAPTER BRASS ASTM-B16 1
3 BOLT STEEL COMMERCIAL (NOTE 1)
4 NUT STEEL COMMERCIAL (NOTE 17)
6 DIAPHRAGM DISC (NOTE 9) COMMERCIAL 1
7 * MAIN VALVE GUIDE BRONZE ASTM-B21, ALLOY C46400 1
8 BODY THREADED CAST STEEL ASTM-A216, GR, WCB 1
8 BODY S.O. FLG CAST STEEL ASTM-A216, GR, WCB 1
8 BODY 150# FLG CAST STEEL ASTM-A216, GR. WCB 1
8 BODY 300# FLG CAST STEEL ASTM-A216, GR. WCB 1
8 BODY S.W.E. CAST STEEL ASTM-A216, GR. WCB 1
9 MAIN VALVE COMPLETE STAINLESS STEEL AISI 17-4 PH 1
11 MAIN VALVE SPRING STAINLESS STEEL AISI TYPE 300 1
12+ BOTTOM CAP GASKET COPPER ASTM-B152 1
12+ BOTTOM CAP GASKET NON-ASBESTOS COMMERCIAL 1
13 BOTTOM CAP (NOTE 2) CAST STEEL ASTM-A216, GR. WCB 1
14 BOTTOM CAP BUSHING BRONZE ASTM-B21, ALLOY C46400 1
15 BOLT STEEL COMMERCIAL 8
16+ BOLT` STEEL COMMERCIAL (NOTE 5)
17 DIAPHRAGM BASE CAST STEEL ASTM-A216, GR. WCB 1
19 DIAPHRAGM BASE GASKET SHEET PACKING COMMERCIAL 1
20 LOCK WASHER STEEL COMMERCIAL (NOTE 5)
21 RETAINING RING STEEL AISI 1018 2
22 SLIP-ON FLANGE, 150# STEEL COMMERCIAL 2
23 SLIP-ON FLANGE, 300# STEEL COMMERCIAL 2
SEAT RING WRENCH STEEL ASTM-A519, GR. 1015 1
B) 1/2" - 4" GPS-1 & 1/2" - 4" GPS-1S
2+ DIAPHRAGM STAINLESS STEEL AISI TYPE 316 2
5 DIAPHRAGM CARBON STEEL ASTM A-285, GR. C 1
10 * SEAT RING, -1 (NOTE 6) (NOTE 6) 1
10 * SEAT RING, -IS STELLITED SST (NOTE 8) 1
+ RECOMMENDED SPARE PARTS.
* THESE PARTS, PLUS RECOMMENDED SPARE PARTS, SHOULD BE ON HAND WHEN OVERHAULING THIS
EQUIPMENT.