User Manual

User manual
Enjoy it.
Safety Precauons
Read these safety instrucons before using your device and
store them for possible future reference.
•The device should not be exposed to dripping or splashing
water.
•CAUTION: Danger of explosion if baery is incorrectly
replaced or not replaced by the same type or equivalent.
•The baery should not be exposed to excessive heat such
as sunshine, fire or similar.
•Different types of baeries, new and used baeries should
not be mixed.
•The baery must be installed according to the polarity.
•If the baery is worn, it must be removed from the product.
•The baery must be disposed of safely. Always use the
collecon bins provided (check with your dealer) to protect
the environment.
• The baery can’t be replaced by the user, but only by the
maker of this product, the aer sales department or a
qualified person.
Modelo :H32T
Bluetooth Version: V 5.1
Bluetooth Range: 10meters
Playback me: 2-3 hours
Charging me: 1.5-2 hour
Standby me: 100 hours
Accessories:
1*user manual
1*type-c charging cable
Turning on/off /pairing
charging
Specificaons
function Touch
reject a call
Call status Double Touch
Redial last number
Call voice assistant
Double Touch
Third times Touch
Ear pod touch funcon
Touch Left ear pod Right ear pod
Long Touch Power on/off
Power on/off
Single Touch
Play/pause answer/End a call
Play/pause answer/ End a call
Medium Touch(2 seconds) Next track Previous track
The headset is automacally powered on aer being taken
out of the charging box. Simultaneous sound prompt
"Boom" sound, (or press and hold two earphones for 1.5
seconds, and the sound prompts "power_on,Boom”). The
red and blue lights flash alternately.Put the earbuds into the
charging box and close (or press and hold both earbuds for 3
seconds) at the same me With the sound of "power_off",
the earplug enters the compartment and the red light is on
(or the red light flashes three mes to shut down).The
headset will automacally shut down within 5 minutes
without connecon;
1) When the two earplugs are taken out of the charging box,
they will be automacally paired.The success sound "boom".
2) Turn on the bluetooth of the mobile phone, search for
(H32T), click connect, aer the connecon is successful,
The voice message " connecon", the indicator light flashes
blue every 5 seconds.
3) Turn off the Bluetooth of the mobile phone or turn off the
headset, there will be a sound "disconnect ".
4) Aer the earphone is taken out of the charging box again,
it will automacally turn on.Move back to connect the
mobile phone Bluetooth.
5) In the call state, the English report number funcon of the
incoming call.
尺寸：200x85MM 80克双铜纸 4C单面印刷 风琴折
When the power of the earbuds is low, the
message "please charge" will sound,The indicator
light flashes red twice every 5 seconds. At this
me, please put the earplugs Charge in the
electric box. The LED of the earbuds is red, and
the charging box’s The led light shows that the
blue light is on, and the earplugs are fully charged
and go out.
When the power supply of the charging box is low,
the blue light flashes, please use the USB charging
cable, Connect the charging case to another, and
then connect it to the computer or its When
charging with other chargers, the LED indicator
will be on and full Lights off.