User's Guide

36
EUROPE (CE)
The emMesh 1.31e Modules have been tested for use in several European countries. "
If emMesh 1.31e Modules are incorporated into a product, the manufacturer must ensure compliance of
the final product with articles 3.1a and 3.1b of the Radio Equipment Directive. A Declaration of
Conformity must be issued for each of these standards and kept on file as described in the Radio
Equipment Directive. Furthermore, the manufacturer must maintain a copy of the emMesh 1.31e Module
user guide documentation and ensure the final product does not exceed the specified power ratings,
antenna specifications, and/or installation requirements as specified in the user guide."
Maximum power and frequency specifications"
Maximum power: 26.5 dBm Equivalent Isotropically Radiated Power (EIRP)$at normal condition. "
OEM labeling requirements "
The “CE” marking must be affixed to a visible location on the OEM product. The following figure shows
CE labeling requirements."
The CE mark shall consist of the initials “CE” taking the following form:"
If the CE marking is reduced or enlarged, the proportions given in the above graduated drawing must be
respected. "
The CE marking must have a height of at least 5 mm except where this is not possible on account of the
nature of the apparatus. The CE marking must be affixed visibly, legibly, and indelibly. "
Penteract customers assume full responsibility for learning and meeting the required guidelines for each
country in their distribution market. Refer to the radio regulatory agency in the desired countries of
operation for more information."
Declarations of conformity"
Penteract has issued Declarations of Conformity for the emMesh concerning emissions, EMC, and
safety. "
Antennas"
Please refer to FCC list of Antennas(