User Manual

ManualsBrandsLEPULSE ManualsAnalysis ScaleLEPULSE Bioelectrical Impedance Analysis Scale

ENGLISH

The Scale uses bio-electrical impedance analysis (BIA) technology to help you

conveniently measure body weight, body fat rate, visceral fat, body water, skeletal

muscle rate, muscle rate, muscle mass, bone mass, protein, BMR, body age and

more.

• DO NOT use the scale if you have implanted medical devices such as pacemakers.

• DO NOT stand on the edge of the scale or jump on it.

• DO NOT overload the scale (Max 396lb/180kg/28st).

• DO NOT drop the scale or drop objects on it as this may damage the sensors.

• DO NOT immerse the scale in water or use chemical cleaning agents. Clean the

scale with a slightly damp cloth.

• Any measurement obtained using this device is for reference only and should not

be considered as a medical opinion.

• DO NOT use to diagnose or treat any medical condition. You should consult your

primary care physician before making changes to your diet, exercise plan or

physical activities.

• Always place the scale on a hard, dry and flat surface before measurement.

• Make sure your feet are dry before stepping on the scale.

• DO NOT use the device if damaged. The continuous use of a damaged unit may

cause injury or improper results.

• Please check the device before each use.

• Be careful when using on the wet and slippery surface.

• For people under 16 years old, the scale can only measure body weight.

THANK YOU FOR YOUR PURCHASE!

WARNING

PRODUCT SPECIFICATIONS

Product size:

Weight unit:

Weight limit:

Weight division:

Power Supply:

Operating temperature:

Operation humidity:

278x278x28mm

lb/kg/st

11lb-396lb/5kg-180kg

0.1lb/0.05kg

1000mAH lithium battery

5-35°C

40%-85% RH

Note: If you need to switch the unit, please tap [Account] - [Settings] - [Switch

units] in the App.

Summary of content (10 pages)

PAGE 1
ENGLISH THANK YOU FOR YOUR PURCHASE! The Scale uses bio-electrical impedance analysis (BIA) technology to help you conveniently measure body weight, body fat rate, visceral fat, body water, skeletal muscle rate, muscle rate, muscle mass, bone mass, protein, BMR, body age and more. WARNING • • • • • • • • • • • • • DO NOT use the scale if you have implanted medical devices such as pacemakers. DO NOT stand on the edge of the scale or jump on it. DO NOT overload the scale (Max 396lb/180kg/28st).
PAGE 2
PRODUCT OVERVIEW Display screen Electrodes Electrodes USB Type-C charging port Reset/Unit button Press and hold the button: Reset et the scale Press the button: Switch units Activate hole Sensor feet Sensor feet 2
PAGE 3
DISPLAY SCREEN Bluetooth WIFI Battery User Weight unit Weight BMI Weight BMI Body fat rate Body water Muscle mass Bone mass rate Heart rate Note: The pictures shown in this manual are only for illustration. Please refer to the actual product for details. BMI TABLE BMI (Suitable for men and women) Age Underweight Healthy weight Overweight Obesity 18-100 <18.5 18.5-23.9 24-27.9 28-34.9 Severe obesity 35 Body Mass Index (BMI) = Weight (kg) ÷ Height^2 (m) For example: BMI = 70kg ÷ (1.
PAGE 4
POWER ON 1 Insert a needle into the hole to activate the scale. 2 Charge the scale with a 5V/1A charger for about 2 hours. Scan the QR Code or search "Fitdays" in the App Store or Google Play to download and install the App. 2 Turn on Bluetooth and open the Fitdays App on your phone. Register your account by email and enter the user information. 4 Enter [Account] page and tap [Device].
PAGE 5
Tap [+] in the upper right corner. 6 Select “Searching Bluetooth for pairing”. 7 Step on the scale to wake it up. 8 Tap the scale icon to enter Wifi setting page. 9 Choose a stable 2.4GHz WiFi and enter the correct WiFi password. 10 When "√" pops up in the App, you have successfully paired your scale with WiFi.
PAGE 6
MEASURING STEPS 1 Place the scale on a flat, hard surface. Carpeted or uneven floors may affect accuracy. Gently press the scale to wake it up. When the scale shows “0.00”, step on the scale with bare feet, and make sure that your feet are in full contact with the electrodes. × √ Note: Please take off your shoes and socks, otherwise the scale can only measure your weight. Stand still while measuring. The weight value will flash three times and lock, followed by the measurement of body fat.
PAGE 7
User Identification When the scale is paired with WiFi and disconnected from the app, it will automatically identify the most likely of the existing user (<2kg weight deviation). If your name is not displayed on the scale, please follow the steps below for the on-screen user identification. 1 When seeing a flashing profile photo and on the scale, please step off the scale, set one foot on it and press to select the user.
PAGE 8
DATA VIEWING AND BASIC SETTINGS Enter [Measure] page, you can view the current measurement results. Tap [details] to view and share multiple types of body data, such as BMI, Body fat, etc. Enter [Charts] page to view the historical data trend. Tap [User data] to view the specific measurement data by date. Enter [Account] page. Tap [Settings] to set themes, target, units, measuring sound, language, password, etc.
PAGE 9
TROUBLESHOOTING Battery is low. Please plug in USB to charge. The scale is overloaded. More than 180kg is on the scale. An error has occurred during data reading. Step off the scale, wait 5 seconds and then step on it again. Problem Inaccurate weighing The App cannot connect with scale. Failed to obtain body fat data. Possible Cause Possible Solution The scale is not placed on a hard, flat surface. Place the scale on a hard, flat surface. The scale is not calibrated before using.
PAGE 10
FCC STATEMENT FCC Warning: Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.