Submittal Sheet

ASSE 1017 CERTIFIED
HIGH LOW
THERMOSTATIC
MIXING VALVES
Submittal Data Sheet S-2001-LF
April 13, 2020
XL-82-LF-BDT____
1-61 GPM (3.8-231 l/min)
• High Low Thermostatic Water Mixing Valve
with 1 GPM (3.8 l/min) minimum flow
capacity+
• 1” threaded inlets, 1-1/4” threaded outlet
(25mm x 32 mm)
• Outlet dial thermometer and ball valve
• Integral combination checkstops with strainers
and wall support
• 125 PSI (8.6 BAR) maximum operating
pressure
• Copper encapsulated thermostatic assembly
with stainless steel shuttle
• Locking temperature regulating handle *
• Temperature adjustment range, 90-140ºF (32-
60ºC) **
• Internal parts of stainless steel
• Rough Bronze Finish
*NOTE: A locking temperature regulator set for 120°F (49°C), is
simply a mechanical setting to prevent unauthorized temperature
set point changes. If incoming water is hotter than 150°F
(65.5°C), the temperature of the factory test, the valve may deliver
in excess of 120°F. MUST BE RESET BY THE INSTALLER
PRESSURE DROP
PSI(BAR)
GPM(l/min)
FLOW RATE
30
25
20
15
10
5
55 (208)
50 (189)
45 (170)
40 (151)
35 (132)
30 (114)
25 (95)
20 (76)
15 (57)
10 (38)
5 (19)
50
45
40
35
(2.1)
(1.7)
(1.4)
(1.0)
(0.7)
(0.3)
(3.4)
(3.1)
(2.8)
(2.4)
60 (227)
65 (246)
5 10 15 20 25 30 35 40 45 50 PSI
0.3 0.7 1 1.4 1.7 2.1 2.4 2.8 3.1 3.4 BAR
1 19 28 34 39 43 48 51 55 58 61 GPM
3.8 72 106 129 148 163 182 193 208 219 231 l/min
PRESSURE DROP
30
20
0
°F
LEONARD
60
°C
0
-10
10
R
40
50
ECO-MIX
™
+
FLOW
MIN
+NOTE: The valve will maintain temperature with 0.5GPM flow from
the domestic hot water loop when properly installed near the hot water
source with a continuously operating recirculation pump.
**NOTE: For temperatures outside of this valve’s stated range, please
see our line of bi-metal valves.
OPTIONS
__SUFFIX IT Inlet thermometers
__SUFFIX LWS Less wall support
__SUFFIX CP Chrome plated
__SUFFIX TC Test Connection (ship loose)
__SUFFIX 0 Less Outlet BDT Assembly
NOTE: Leonard Valve Company reserves the right of product or
design modification without notice or obligation
This valve is certified to meet Low Lead requirements of
wetted surface area containing less than 0.25% lead by
weight. All other component accessories, the sum total of
which comprise the wetted surface of this product, contain
less than one quarter of one percent lead by weight.
BDT ASSEMBLY
IS A COMPONET ACCESORY
INCLUDED BY FACTORY
!
WARNING: This product can expose you to
chemicals including lead, which is known to the
State of California to cause cancer. For more
information, go to www.P65Warnings.Ca.gov
cUPC CERTIFIED