User manual
Clock function Application
TIME DELAY To combine DURATION and END function.
MINUTE MIND‐
ER
To set countdown time. This function has no effect on the op‐
eration of the appliance. You can set the MINUTE MINDER at
any time, also when the appliance is off.
Setting the time. Changing the
time
You must set the time before you operate
the oven.
The   flashes when you connect the
appliance to the electrical supply, when
there was a power cut or when the timer is
not set.
Press the   or   to set the correct time.
After approximately five seconds, the
flashing stops and the display shows the
time of day you set.
To change the time of day press   again
and again until 
 starts to flash.
Setting the DURATION
1. Set an oven function and temperature.
2. Press   again and again until 
starts to flash.
3. Press   or   to set the DURATION
time.
The display shows 
.
4. When the time ends,   flashes and
an acoustic signal sounds. The
appliance deactivates automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions
and the knob for the temperature to
the off position.
Setting the END
1. Set an oven function and temperature.
2. Press   again and again until 
starts to flash.
3. Press   or   to set the time.
The display shows  .
4. When the time ends,   flashes and
an acoustic signal sounds. The
appliance deactivates automatically.
5. Press any button to stop the signal.
6. Turn the knob for the oven functions
and the knob for the temperature to
the off position.
Setting the TIME DELAY
1. Set an oven function and temperature.
2. Press   again and again until 
starts to flash.
3. Press   or   to set the time for
DURATION.
4. Press  .
5. Press   or   to set the time for END.
6. Press   to confirm.
Appliance turns on automatically later on,
works for the set DURATION time and
stops at the set END time. At the set time
an acoustic signal sounds.
7. The appliance deactivates
automatically. Press any button to stop
the signal.
8. Turn the knob for the oven functions
and the knob for the temperature to
the off position.
Setting the MINUTE MINDER
1. Press   again and again until 
starts to flash.
2. Press   or   to set the necessary
time.
The Minute Minder starts automatically
after 5 seconds.
Leonard 9










