User guide
Control technology | EtherCAT communication manual
Commissioning of the system
Detailed commissioning steps
76 L DMS 3.1 EN 01/2011 TD17
7.2.8.3 Configuring the communication parameters
Set the communication parameters to establish a connection to the respective IPC.
How to configure the communication parameters
1. Select the OnlineCommunication Parameters command:
• Enter the designation of the new channel in the Name input field.
• Confirm the entry by clicking the OK button.
2. Enter the parameters in the Values column in the Communication parameters
dialog box.
• Double-click the respective value to edit the default values: