User guide

Electrical installation
Wiring
Terminal assignment
4

44
EDK94ZPM113 DE/EN/FR/ES/IT 4.0
1
2
SSP94IT001
Fig. 4−4 Plugging the IT insulating cap onto the earthing jumper
Proceed as follows to disconnect the internal connection between the filters
and PE:
1. Remove IT insulating cap from the parking position  in the installation
backplane.
– For this apply a screwdriver on the right or left and lever off the
insulating cap.
– Optionally the insulating cap can be carefully removed using an
appropriate pliers.
2. Attach IT insulating cap to the earthing jumper  until it clicks into place.
Motor
Terminal X105
(right part)
Labelling Description
U
V
W
Connection of the motor phases
 Functional earth
Connect the shields of the motor phases and of the
optional motor brake control separately and with a
surface as large as possible to the shield sheet. Use
EMC wire clamp or EMC shield clamp for fixing.
 Connection for the PE conductor on the motor side
with M5 ring cable lug
SSP940X105